Cool How To Ratchet Strap Lumber Ideas. Attach the hooks that are attached to the ratchet into position, and do the same with. I used ratchet straps when i dried a ash log.
How to Use HeavyDuty Ratchet Straps in Your Truck Bed Engaging Car from altdriver.com
No more clutter and ready to tie down anything. How to use ratchet strap. Take the loose strap and insert the end without the hook into the slot.
Grab The Polyester Tie Down Webbing From The Nonfixed Side And Begin To Pull The Webbing To Release.
No more clutter and ready to tie down anything. Move it up and down, tightening the strap. Double it over and thread the strap back over and pull it tight to take out the excess strap.
Pull The Flat End Of The Strap To Remove Any And All Slack.
How to tie down a small lumber load with ratchet straps: Place the secondary loop through the hole. Make a secondary loop on the strap.
Attach A Ratchet Strap To A Rear Anchor Point On One Side Of The Bed And Lay It Across The End Of The Bundle To The Rear Anchor On The Other Side.
Secure one of your ratchet straps to one of the anchor points. The webbing should wrap around the ratchet's axle. Take the inserted loop back over the entire roll of strap.
Open The Ratchet Until It Is Completely Open And The Ratchet Is Laying Flat.
Be careful not to damage the thing you're tightening against. How to tie down a heavy lumber load with ratchet. How to use ratchet strap.
Probably One Of The Best Ways To Store A.
Ratchet the axle with the handle until the open slot on the axle faces up. Pull tight to create a firm grip on the excess strap. (the open ratchet will be in an "l" shape, not flat.) with the ratchet head fully open and the spiky wheels (cogs) facing up, take the strap, and feed it through the back of the ratchet head (underneath) and out the top.
